Dodge Charger 06-09 SRT-8 6.1L High Flow Cats 16420 | MagnaFlow
MagnaFlow Direct-Fit
High Flow Catalytic Converter Exhaust Section
MagnaFlow Direct-Fit High Flow Catalytic Converter Exhaust Section, built to fit behind the factory manifolds to the centre exhaust section.
This system is designed to pass emissions test and designed to optimise exhaust flow using mandrel bent tubing and High Flow Converter Cores.
Suitable For:-
DODGE CHARGER SRT-8 HEMI 2006-2009 V8 6.1L; Front, Performance Pipe; 3.0in. Tubing (With Converter)
Please Note: This application is not suitable for European Righ Hand Drive Models. USA Imports Only
Right Hand Drive Manifolds were modified to accommodate steering shaft altering catalytic converter position.
Item Sold as Garage Soiled.
Previously supplied to customer ordering wrong application. Returned part. Slight Dent to converter heat shield during transit, doesn't affect the product or its performance.
Material: 100% Stainless Steel
Tubing O.D. Size: 3in.
System Type: Catalytic Converter
Features and Benefits:
This system is designed to pass emissions test and designed to optimise exhaust flow using mandrel bent tubing and High Flow Converter Cores.
Suitable For:-
DODGE CHARGER SRT-8 HEMI 2006-2009 V8 6.1L; Front, Performance Pipe; 3.0in. Tubing (With Converter)
Please Note: This application is not suitable for European Righ Hand Drive Models. USA Imports Only
Right Hand Drive Manifolds were modified to accommodate steering shaft altering catalytic converter position.
Item Sold as Garage Soiled.
Previously supplied to customer ordering wrong application. Returned part. Slight Dent to converter heat shield during transit, doesn't affect the product or its performance.
Material: 100% Stainless Steel
Tubing O.D. Size: 3in.
System Type: Catalytic Converter
Features and Benefits:
Dyno Tested And Proven To Make Power, Performance Gains In Horsepower And Torque, Easy To Install, Mandrel-Bent. All Welded. Built To Last.Â
Part Number: 16420
Euro Emissions Standards:
*As MagnaFlow catalytic converters are designed primarily for the US market, they are not officially tested to Euro Emissions standards. However, MagnaFlow Italy have tested a large variety of catalytic converters. Through their own testing, with local garages and test laboratories, Magnaflow have established their catalytic converters perform equally as well as the Euro Type Approved catalytic converter equivalents.
Please note. These are Non-Type approved catalytic converters. It is therefore, “ILLEGAL
TO SUPPLY THESE PARTS FOR TYPE-APPROVED VEHICLES FIRST USED ON OR AFTER 1ST MARCH 2001”
Warranty Information:
The manufacturers catalytic converter warranty covers the construction of the catalytic converter, and does not cover against emissions testing. Vehicles running healthily that are not running too lean or rich should pass an emissions test with MagnaFlow catalytic converters installed without issue, but this is not a guarantee. The warranty covers failure of the catalytic converter. Should the catalytic converter fail, please contact us to discuss your options.
Why Choose Nemesis UK?
Nemesis UK sell only genuine parts and are honoured to be the top distributor for MagnaFlow products in the UK. Please be aware of other online retailers selling copycat versions of MagnaFlow's products with similar part numbers. These are not manufactured to the same standards as MagnaFlow's catalytic converters. These will have a lower weight of precious metals in their construction.
Our warehouse holds the UK's largest stock of direct-fit exhausts, universal mufflers and catalytic converters, offering next-day despatch on 100s of parts.
MagnaFlow universal catalytic converters are available in various sizes.
Can't find the part you're looking for? Get in touch.
MagnaFlow Direct-Fit
High Flow Catalytic Converter Exhaust Section
MagnaFlow Direct-Fit High Flow Catalytic Converter Exhaust Section, built to fit behind the factory manifolds to the centre exhaust section.
This system is designed to pass emissions test and designed to optimise exhaust flow using mandrel bent tubing and High Flow Converter Cores.
Suitable For:-
DODGE CHARGER SRT-8 HEMI 2006-2009 V8 6.1L; Front, Performance Pipe; 3.0in. Tubing (With Converter)
Please Note: This application is not suitable for European Righ Hand Drive Models. USA Imports Only
Right Hand Drive Manifolds were modified to accommodate steering shaft altering catalytic converter position.
Item Sold as Garage Soiled.
Previously supplied to customer ordering wrong application. Returned part. Slight Dent to converter heat shield during transit, doesn't affect the product or its performance.
Material: 100% Stainless Steel
Tubing O.D. Size: 3in.
System Type: Catalytic Converter
Features and Benefits:
This system is designed to pass emissions test and designed to optimise exhaust flow using mandrel bent tubing and High Flow Converter Cores.
Suitable For:-
DODGE CHARGER SRT-8 HEMI 2006-2009 V8 6.1L; Front, Performance Pipe; 3.0in. Tubing (With Converter)
Please Note: This application is not suitable for European Righ Hand Drive Models. USA Imports Only
Right Hand Drive Manifolds were modified to accommodate steering shaft altering catalytic converter position.
Item Sold as Garage Soiled.
Previously supplied to customer ordering wrong application. Returned part. Slight Dent to converter heat shield during transit, doesn't affect the product or its performance.
Material: 100% Stainless Steel
Tubing O.D. Size: 3in.
System Type: Catalytic Converter
Features and Benefits:
Dyno Tested And Proven To Make Power, Performance Gains In Horsepower And Torque, Easy To Install, Mandrel-Bent. All Welded. Built To Last.Â
Part Number: 16420
Euro Emissions Standards:
*As MagnaFlow catalytic converters are designed primarily for the US market, they are not officially tested to Euro Emissions standards. However, MagnaFlow Italy have tested a large variety of catalytic converters. Through their own testing, with local garages and test laboratories, Magnaflow have established their catalytic converters perform equally as well as the Euro Type Approved catalytic converter equivalents.
Please note. These are Non-Type approved catalytic converters. It is therefore, “ILLEGAL
TO SUPPLY THESE PARTS FOR TYPE-APPROVED VEHICLES FIRST USED ON OR AFTER 1ST MARCH 2001”
Warranty Information:
The manufacturers catalytic converter warranty covers the construction of the catalytic converter, and does not cover against emissions testing. Vehicles running healthily that are not running too lean or rich should pass an emissions test with MagnaFlow catalytic converters installed without issue, but this is not a guarantee. The warranty covers failure of the catalytic converter. Should the catalytic converter fail, please contact us to discuss your options.
Why Choose Nemesis UK?
Nemesis UK sell only genuine parts and are honoured to be the top distributor for MagnaFlow products in the UK. Please be aware of other online retailers selling copycat versions of MagnaFlow's products with similar part numbers. These are not manufactured to the same standards as MagnaFlow's catalytic converters. These will have a lower weight of precious metals in their construction.
Our warehouse holds the UK's largest stock of direct-fit exhausts, universal mufflers and catalytic converters, offering next-day despatch on 100s of parts.
MagnaFlow universal catalytic converters are available in various sizes.
Can't find the part you're looking for? Get in touch.
$397.60
Original: $1,136.01
-65%Dodge Charger 06-09 SRT-8 6.1L High Flow Cats 16420 | MagnaFlow—
$1,136.01
$397.60Description
MagnaFlow Direct-Fit
High Flow Catalytic Converter Exhaust Section
MagnaFlow Direct-Fit High Flow Catalytic Converter Exhaust Section, built to fit behind the factory manifolds to the centre exhaust section.
This system is designed to pass emissions test and designed to optimise exhaust flow using mandrel bent tubing and High Flow Converter Cores.
Suitable For:-
DODGE CHARGER SRT-8 HEMI 2006-2009 V8 6.1L; Front, Performance Pipe; 3.0in. Tubing (With Converter)
Please Note: This application is not suitable for European Righ Hand Drive Models. USA Imports Only
Right Hand Drive Manifolds were modified to accommodate steering shaft altering catalytic converter position.
Item Sold as Garage Soiled.
Previously supplied to customer ordering wrong application. Returned part. Slight Dent to converter heat shield during transit, doesn't affect the product or its performance.
Material: 100% Stainless Steel
Tubing O.D. Size: 3in.
System Type: Catalytic Converter
Features and Benefits:
This system is designed to pass emissions test and designed to optimise exhaust flow using mandrel bent tubing and High Flow Converter Cores.
Suitable For:-
DODGE CHARGER SRT-8 HEMI 2006-2009 V8 6.1L; Front, Performance Pipe; 3.0in. Tubing (With Converter)
Please Note: This application is not suitable for European Righ Hand Drive Models. USA Imports Only
Right Hand Drive Manifolds were modified to accommodate steering shaft altering catalytic converter position.
Item Sold as Garage Soiled.
Previously supplied to customer ordering wrong application. Returned part. Slight Dent to converter heat shield during transit, doesn't affect the product or its performance.
Material: 100% Stainless Steel
Tubing O.D. Size: 3in.
System Type: Catalytic Converter
Features and Benefits:
Dyno Tested And Proven To Make Power, Performance Gains In Horsepower And Torque, Easy To Install, Mandrel-Bent. All Welded. Built To Last.Â
Part Number: 16420
Euro Emissions Standards:
*As MagnaFlow catalytic converters are designed primarily for the US market, they are not officially tested to Euro Emissions standards. However, MagnaFlow Italy have tested a large variety of catalytic converters. Through their own testing, with local garages and test laboratories, Magnaflow have established their catalytic converters perform equally as well as the Euro Type Approved catalytic converter equivalents.
Please note. These are Non-Type approved catalytic converters. It is therefore, “ILLEGAL
TO SUPPLY THESE PARTS FOR TYPE-APPROVED VEHICLES FIRST USED ON OR AFTER 1ST MARCH 2001”
Warranty Information:
The manufacturers catalytic converter warranty covers the construction of the catalytic converter, and does not cover against emissions testing. Vehicles running healthily that are not running too lean or rich should pass an emissions test with MagnaFlow catalytic converters installed without issue, but this is not a guarantee. The warranty covers failure of the catalytic converter. Should the catalytic converter fail, please contact us to discuss your options.
Why Choose Nemesis UK?
Nemesis UK sell only genuine parts and are honoured to be the top distributor for MagnaFlow products in the UK. Please be aware of other online retailers selling copycat versions of MagnaFlow's products with similar part numbers. These are not manufactured to the same standards as MagnaFlow's catalytic converters. These will have a lower weight of precious metals in their construction.
Our warehouse holds the UK's largest stock of direct-fit exhausts, universal mufflers and catalytic converters, offering next-day despatch on 100s of parts.
MagnaFlow universal catalytic converters are available in various sizes.
Can't find the part you're looking for? Get in touch.
